InSinkErator SST-FLTR 2/3-Gallon Stainless Tank and Filtration System
From InSinkErator
In-Sink-Erator SST-FLTR Stainless Steel Tank and Filtration SystemDesigned for InSinkErator Instant Hot Water Dispenser faucets, this revolutionary new tank has been engineered for durability, convenience and peace of mind. With a generous 2/3-gallon capacity, it provides 35% more near-boiling 200;F water than our previous model.With its patented top mounted expansion chamber and special aspiration system, this tank delivers on-demand flow and unmatched performance. A thermal protection system provides overheating protection, and the durable stainless steel core means longer life. Tool-free connections allow for easy installation or replacement.In-Sink-Erator SST-FLTR Stainless Steel Tank and Filtration System Features:; F-201 Filtration System included for fresher tasting water; 35% more near-boiling water from larger 2/3 gallon stainless steel tank; Easy to adjust temperature control; Tool-free tank connections and dry start protection to ease installation; Provides 60 cups/hour of near-boiling water; 3-Year We Come To You; In-Home Service Warranty; 115 volts, 750 watts, 6.25 amps; NSF; and UL listed; For use with In-Sink-Erator Series 1100 and other dispenser models, except model HOT1; Capacity: 2/3 gallon tank dispenses 60 cups of 200;F water per hour ; Electrical: 120 volts A.C, 750 watts, 6.25 amp heating element with grounded three (3) prong plug; Thermostat: Snap-action, adjustable from 160;F to 210;F (factory pre-set at 200;F); Insulation: Meets U.L. 94HF-1 flammability specification
Amazon Sales Rank: #1379 in Home Improvement Color: Grey Brand: InSinkErator Model: SST-FLTR Released on: 2006-07-06 Number of items: 1 Dimensions: 42000.00 pounds
The In-Sink-Erator stainless steel tank and filtration system is a hot water dispenser system capable of producing 60 cups of 200 degree Fahrenheit water per hour. The stainless steel tank and filtration system is to be used with a hot water dispensing faucet, such as the In-Sink-Erator Premium hot or hot and cool designer faucets. This system features F-201 filtration that is designed exclusively for hot water dispensers. These systems deliver near boiling water instantly. The 2/3 gallon tank heats the water to an adjustable temperature. The compact tank mounts neatly under the sink and is plumbed into the cold water line and plugged into a standard 115 volt outlet. Instant hot water dispensers use very little energy, less than a 40 watt light bulb. The electrical specifications are 115 volts A.C., 750 watts and 6.5 amp heating elements. We welcome you to enjoy style and convenience with time tested quality by using the In-Sink-Erator Premium hot and cool water dispensers.
Not an easy replacement On InSinkErator's (ISE) recommendation, we bought this tank and filter to replace our 5 year old unit that still heated, but whose output was undrinkable - a funny taste due to corrosion of the tank (?). While the replacement tank and filter work fine, it was quite a job to install for this amateur plumber, due to ISE not providing good information or the right fittings. Our old unit used 1/4" copper from the faucet to the supply and to the tank. The new unit uses 3/8" polyethylene tubing. ISE should have known this, since we provided the serial number of the old unit when we called and had this unit recommended, hence only 3 stars. Gory details follow for anyone in the same situation. The new tank is wider than the old one. So, I had to move the mounting bracket so the new tank did not interfere with the supply valve. When I called to explain the tubing mismatch, ISE sent an adapter for the line from the faucet to the tank (1/4" compression to quick-disconnect). However, the 3/8" to 1/4" Y adapter from the filter leaked when I tried it with 1/4" copper tubing. I ended up getting 2 1/4" to 3/8" compression adapters from Home Depot, which did fine with the copper 1/4" tubing and the plastic 3/8" tubing. Two are needed since the filter goes in between the supply and the faucet. Do-it-yourselfers will also need a compact tubing cutter and some extra 1/4" compression nuts and ferrules. Appears to be a big improvement Only time will tell, but the SST-FLTR heating replacement appears to be a noticable improvement over the original heating unit. My original instant hot water heater began leaking after about 3 years of use. This replacement has an external dial that allows for temperature adjustment depending on how hot you really want your water. We actually didn't need it to be scalding hot, so we've moved the dial to the 12 o'clock position and it seems to be fine for our purposes. The casing is thick, solid plastic and the connectors and tubing appears to be improved over the early model. The heating unit also seems to be better insulated than the original, so hopefully it will keep the water hotter longer and actually save some energy. My only gripe is with the pricing of the SST-FLTR only. Cheapest that I could find was $199 online, yet my local hardware store sells brand new H770-SS models (dispenser and heating unit) for $179. Same heating unit as the SST-FLTR. I used the heating unit as my replacement and I'll see if I can sell the dispenser part for a few bucks at auction. Warranty support problems with Insinkerator Please call Insinkerator and verify the warranty policy before purchasing and installing these types of products. My poor rating is entirely related to the warranty service I attempted to obtain after my SST hot water dispenser quit working after 8 months of operation. During my contact with Insinkerator via the 1-800 number it was revealed that I must have have a copy of my receipt "for professional product installation." Okay, what kind of a game is this? I do not have a receipt for installation, because I installed it myself using the instructions that were provided in the manual. The manual never specified professional installation required for warranty coverage. On my further insistence on unit return and replacement, the customer service rep continued "We do not have a repair facility or shipping address. An Insinkerator selected plumber must be dispatched to your location. "You should be aware that you will be liable for the service call and the full unit replacement costs if it is determined the installation was not correct." Okay, this is rubbish. The unit is a small, plastic, foam and very thin steel tank weighing less than a two pounds. It has two internal components, a 98 cent thermostat and heater element. The water flow is fine, so the thermostat or element quit. Why should a plumber be required to fix an ELECTRICAL PROBLEM? At the time of purchase I was not aware of other alternatives. I now see that a simple electric hot water pitcher or heat-on-use hot water heater would have been better alternatives and have provided better warranty support. My advice, keep looking.
